5
Safety instructions . . . . . . . . . .2
Product view . . . . . . . . . . . . . .3
How to put it together . . . . . .4-5
Index . . . . . . . . . . . . . . . . . . . .5
How to use your
BISSELL PowerClean . . . . . . 6-7
Using special tools . . . . . . . . . .8
Routine maintenance . . . . 9-11
Troubleshooting . . . . . . . . . . .12
Replacement parts . . . . . . . . .13
Warranty . . . . . . . . . . . . . . . .14
Consumer Services . . . . . . . . .14
Index
Crevice Tool
Wand
Dusting Brush
Upholstery Nozzle
5.
6.
With the front of Vacuum facing down and the Power Cord
placed off to the side, place the Tool Caddy in position on the
back of the Vacuum Body. The Tool Caddy should be flush with
the back of the Vacuum Body if you have positioned it correctly.
Place the three screws into the holes provided, then tighten
with a Phillips head screwdriver until each screw head is
flush with the Tool Caddy surface. The top screw will also
assemble through the Handle.
Attach Tool Caddy to Vacuum Body
7.
8.
Attach Tools to Caddy as shown. Dust Brush and Upholstery
Nozzle storage areas are identified by shape and symbol, the
Wand slips into the two clips at the side of the Vacuum Body,
and the Crevice Tool slips into the top of the Wand.
Examine the Vacuum Hose Assembly. One end has a short cuff
with two (2) slots. Place the short cuff into the hole in the
Vacuum Foot Cover (left of the Headlight) and turn clockwise
until you feel a slight ‘click.’ Attach the long cuff to the clip
near the top of the Vacuum Body Cover.
Assembly is now complete.
Attach Tools to Caddy
7.Tool Attachment
8.Connect
Hose to
Powerfoot
