Before you clean
1.
Move furniture to another area if
cleaning an entire room. (Optional)
2.
Vacuum carpet thoroughly.
3.
Plan your cleaning route to leave an
exit path. It is best to begin cleaning
in the corner farthest from your exit.
4. Pre-Treating
(optional) Pre-treat stubborn
stains and highly soiled carpet in hallways and
other high-traffic areas.
a.
Generously spray BISSELL Stain
PreTreat evenly over soiled area.
Caution: DO NOT OVER-WET CARPET
b.
Wait 3-5 minutes before deep cleaning.
Fill the tank
1.
Remove the solution tank by lifting it straight
up, then away from the lower body.
2.
Unscrew the black cap at the bottom of the
solution tank.
3.
Fill with hand hot tap water to the WATER
line. Fill the rest of the tank with BISSELL 2X
Formula to the FORMULA line. Replace and
tighten the black cap.
4.
Place solution tank on lower body.
Operations
www.BISSELL.com
7
WARNING
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner. Non-BISSELL
cleaning solutions may harm the machine and void
the guarantee.
WARNING
To reduce the risk of fire, use only BISSELL deep cleaning
formula for full size machines in your deep cleaner. Use of
cleaning formulas that contain lemon or pine oil may dam-
age this appliance and void the guarantee. Chemical spot
cleaners or solvent-based soil removers should not be used.
These products may react with the plastic materials used in
your deep cleaner causing cracking or pitting.
4a.
2.
1.
4.
3.
» To ensure proper function,
make sure the tank is completely
seated. Failure to do so can result in
reduced or no spray.
Tip
