Troubleshooting
Problem
Possible causes
Remedies
Reduced
spray OR
no spray in
upright mode
Solution tank empty
Refill tank with water and formula
Lint screen on solution tank cap
clogged
Soak solution tank cap in warm water
and then rinse under running water
Upper body not properly attached Repeat steps 2-6 on page 5
Reduce Spray
or No Spray
Attachment
Solution tank empty
Refill tank with water and formula
Spray nozzle clogged
Clean spray nozzle by rinsing
tool under water
Pump needs priming
Place tool on floor and press
spray trigger
Machine is reclined
Return machine to full upright
position until it locks into place
ReadyTools dial is set to “FLOOR
CLEANING”
Choose “TOOLS” setting on
ReadyTools dial
Deep cleaner
not picking
up cleaning
solution
Collection tank not aligned/
secured
Check tank alignment and secure
with side latches
Collection tank full
Empty tank
Removable nozzle installed
improperly
Unplug unit. Align four "hooks" into
bottom first, then snap into place
on top
Removable nozzle full of debris
Unplug unit. Remove nozzle and rinse
under running water
Red lint screen under collection
tank clogged
Remove debris from lint screen
ReadyTools dial not set properly
Choose either “FLOOR CLEANING”
or “TOOLS” for desired cleaning
method
Brush not
turning
Handle not reclined
Press the red recline lever on the
back of the unit to activate the
brush. Follow step 4 under "Carpet
cleaning" on page 8
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do
not return
this product
to the store.
www.BISSELL.com
13
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
