background image

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

I

MPORTANT SAFETY INSTRUCTIONS

 3

When using an electrical appliance, basic 

precautions should be observed, including 

the following: 

Read all  

instRuctions 

befoRe using youR  

upRight VacuuM. 

 

Always connect to a polarized outlet  

(left slot is wider than right). Unplug from 

outlet when not in use and before conducting 

maintenance. 

  

WaRning:

 to 

reduce the risk of fire, 

electric shock, or injury:

 

 

Do not modify the polarized plug to fit a  

non-polarized outlet or extension cord.

 

Do not leave vacuum cleaner unattended 

when it is plugged in.

 

Unplug from outlet when not in use and  

before servicing.

 

Do not use outdoors or on wet surfaces.

 

Do not allow children to operate vacuum  

cleaner or use as a toy.

 

Close attention is necessary when used 

by or near children.

 

Do not use for any purpose other than 

described in this user’s guide.

 

Use only manufacturer’s recommended  

attachments.

 

Do not use with damaged cord or plug.

 

If appliance is not working as it should, 

has been dropped, damaged, left out-

doors, or dropped into water, have it 

repaired at an authorized service center.

 

Do not pull or carry by cord, use cord as 

a handle, close a door on cord, or pull 

cord around sharp edges or corners. Do 

not run appliance over cord. Keep cord 

away from heated surfaces.

 

Do not unplug by pulling on cord. To 

unplug, grasp the plug, not the cord.

 

Do not handle vacuum cleaner or plug 

with wet hands.

 

Do not put any object into openings. Do 

not use with any opening blocked; keep 

openings free of dust, lint, hair, and  

anything that may reduce air flow.

 

Keep hair, loose clothing, fingers, and all 

parts of body away from openings and 

moving parts.

 

Turn off all controls before plugging or 

unplugging vacuum cleaner.

 

Use extra care when cleaning stairs.

 

Unplug before attaching the TurboBrush

®  

Tool

 

Do not pick up flammable materials 

(lighter fluid, gasoline, kerosene, etc.) or 

use in the presence of explosive liquids 

or vapors.

 

Do not pick up toxic material (chlorine 

bleach, ammonia, drain cleaner, etc.).

 

Do not use vacuum cleaner in an 

enclosed space filled with vapors given 

off by oil base paint, paint thinner, some 

moth proofing substances, flammable 

dust, or other explosive or toxic vapors.

 

Do not pick up hard or sharp objects 

such as glass, nails, screws, coins, etc.

 

Do not pick up anything that is burning or 

smoking, such as cigarettes, matches, or 

hot ashes.

 

Do not use without filters in place.

 

Use only on dry, indoor surfaces.

 

Keep appliance on a level surface.

 

Do not carry the vacuum cleaner while it 

is running.

 

Brush may unexpectedly restart. Unplug 

from outlet when cleaning or servicing

saVe these  

instRuctions 

foR futuRe use

this appliance 

has a polaRiZed 

plug.

To reduce the risk of electric shock, this 

appliance has a polarized plug (one blade 

is wider than the other). This plug will fit in 

a polarized outlet only one way. If the plug 

does not fit fully in the outlet, reverse the 

plug. If it still does not fit, contact a qualified 

electrician to install a proper outlet. Do not 

change the plug in any way.

This model is for household use only.

Summary of Contents for OptiClean 30C7 SERIES





















Reviews: