6
BISSELL.com
Emptying the Dirty Water Tank
1.
Press the button on the top
of the tank, grab the front
handle and pull tank out.
2.
Hold tank lid near sides of
filter and pull up. Pull strainer
to separate debris for disposal.
3.
Pour dirty water into utility
sink or similar receptacle for
waste water. Rinse the tank.
Using the Clean Out Cycle
Note:
Empty the dirty water tank prior to cleaning the machine.
4.
Optional: Add 2oz of
FreshStart™ Clean-Out
Formula
to the tray. Formula
will fill to just below the
recessed portion of the tray.
5.
Place the machine on the
dock. Add water to reach the
Clean Out Cycle line if needed.
6.
Press the Clean Out Cycle
Button to start the 40-second
cycle.
Note:
If the battery
runs out the Clean Out Cycle
cannot run until your machine
is docked for 30 seconds.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
After-Cleaning Care
Go to
support.BISSELL.com
for a full list of how-to videos.
Cleaning with Hard Floor Sanitize Formula
Please read “DIRECTIONS FOR USE” on Hard Floor Sanitize label. Use on hard nonporous floors only.
1.
Remove visible soil before
cleaning. Hold trigger down to
apply solution to the floor.
2.
Allow formula to remain wet
on the floor for five minutes.
3.
With the trigger released,
make forward and backward
passes to extract solution.
Cleaning Your Floors (continued)
