BISSELL.com
15
Troubleshooting
Problem
Possible causes
Remedies
Reduced
spray or
no spray
Bladder may be empty.
Press Power Button OFF; refill
bladder with clean warm (60°F/140°C
MAX) tap water and formula.
2-in-1 Water Tank may not be
seated
properly.
Press Power Button OFF;
remove and reseat tank so it
sits snugly on machine.
Pump may have lost prime.
Press Power Button
OFF;
after 1 minute turn on and press
Spray Trigger.
DirtLifter
PowerBrush
does not turn
Belts are off or broken.
Press Power Button OFF and
unplug machine from outlet. Follow
instructions on pages 12 and 13.
Circuit breaker on machine may
have tripped.
Press Power Button OFF and
unplug from outlet. Check to see if
foreign object is caught in Brush Roll.
Remove object. Plug machine in to
reset circuit breaker.
Cleaner
not picking
up formula
2-in-1 Water Tank may not be
seated properly.
Press Power Button
OFF;
remove and reseat tank so it
sits snugly on machine.
2-in-1 Water Tank may not be
assembled properly.
Make sure Tank Latches on both sides
of tank are latched properly.
2-in-1 Water Tank has picked up
maximum dirty water and red
float door has closed.
Empty 2-in-1 Water Tank and refill.
(See “Operations” section.)
Red float door in tank may have
closed as a result of bumping
object or moving machine back
and forth too quickly.
Press Power Button OFF so the
float door can open. Press Power
Button
back ON to continue
cleaning. Be sure your forward and
backward strokes are done at a
slower pace.
Red lint screen near air duct
is dirty.
Follow cleaning instructions in
step 4 on page 12.
Other maintenance or service not included in the manual should be performed by an
authorised service representative.
Thank you for selecting a BISSELL® product.
WARNING
To reduce the risk of electric shock, push Power Button
OFF and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
