BISSELL.com
7
1
2
3
4
5
6
7
8
9
Before You Clean
1.
Plan activities to give your carpet time to dry.
2.
Move furniture to another area if cleaning
an entire room (optional).
3.
Remove loose dirt and impediments.
4.
Plan your cleaning route to leave an exit path.
It is best to begin cleaning in the corner farthest
from your exit.
5.
Pretreating (optional):
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in
high-traffic areas such as entryway and hallways.
To Pretreat:
a.
Using BISSELL Stain Pretreat
(sold separately), generously and evenly
spray over soiled area.
Do not overwet.
b.
Wait 3-5 minutes before deep cleaning.
c.
Clean as normal using your BISSELL
carpet & upholstery washer, following
instructions below.
Filling the 2-in-1 Water Tank
1.
Remove tank from base of machine by lifting
up Tank Carry Handle. Carry like a bucket to
the sink.
2.
Unlatch top of tank from bottom
by lifting up on Tank Latches on
each side of the tank.
3.
Fill bladder with warm
(60°C/140°F MAX) tap water.
Do not boil or microwave water
as it can destroy the bladder.
4.
Using measuring cup provided,
pour two measuring cups filled to
the indicated in formula bottle cap,
line (5 oz/138 ml total) into bladder.
NOTE: Always use genuine BISSELL formulas to
maximize cleaning and for the safety of
your machine.
5.
Replace top of tank back onto bottom and
secure latches on both sides of tank.
NOTE: Remember to secure Tank Latches on
each side of tank and test to make sure they
are secure before picking up tank.
6.
Place tank back into machine base, seating
firmly in place.
Operation s
1.
2.
4.
5.
WARNING
To reduce the risk of fi re and electric shock due to
internal component damage, use only BISSELL®
cleaning formulas intended for use with the carpet
& upholstery washer. Non-BISSELL cleaning formulas
may harm the machine and void the guarantee.
60C
