w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
6
Handle position
Press the handle release pedal with your
foot to place your CleanView Helix into one
of three cleaning positions.
1. Upright
–
for storage and above floor
cleaning with tools.
2.
Normal cleaning
–
press handle release
household floor cleaning tasks.
3. Low cleaning
–
With the vacuum in
normal cleaning position, press handle
release pedal again, use for reaching under
low furniture such as tables, chairs or beds.
Height adjustment
There are five height settings available
for various floor surfaces. Turn the dial
on the foot of the cleaner to the desired
setting.
Lowest setting
–
for low pile carpet or bare
floors. to pick up debris it may be
necessary
to move up one setting.
Medium setting
– for medium pile carpet.
Highest setting
– for high pile and most
shag carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to push, adjust to the next
higher setting.
if the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off the foot
while turning.
Transporting cleaner
1.
to move your cleaner from room to room,
put the handle in the upright position, tilt
the cleaner back on its rear wheels and
push forward.
2.
the cleaner can also be moved by using
the carrying handle.
CAUTION:
Before using your vacuum,
make sure that the dirt con-
tainer is in locked position and
that all filters (inner circular,
outer circular, pre-motor and
post-motor) are in place. Do
not operate your vacuum with-
out these filters.
Tip:
Your vacuum features a Quick Release
®
cord wrap. to remove the power cord
quickly and easily, rotate the upper cord
wrap towards floor, and slip power cord
from upper and lower cord wraps.
Tip:
before cleaning
under low furniture,
check area first for
objects that might
harm the unit or
block the vacuum
hose
.
Tip:
hair, string and
small objects can
block the vacuum
hose or tools. check
them occasionally
for obstructions.
