7.
15.
16.
Run water
through here
Screw
11.
12.
Operations
7.
Set the ReadyTools dial to the TOOLS setting.
This will allow spray and suction from the hose.
8.
Attach the cleaning tool of your choice to the
end of the hose.
9.
Clean by pressing the spray trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the spray trigger to suction
dirty water. Continue to clean in the area,
working in small sections, until dirt is removed.
Caution: Do Not Overwet.
10.
When finished cleaning, remove and rinse
tool(s) in clean, running water.
11.
It is recommended that you suction clean
water from the tap to rinse out the hose.
12.
Before wrapping hose onto tool rack, lift end
of hose and stretch out to ensure all water is
cleared from hose.
13.
Wrap flex hose around tool rack.
14.
Empty 2-in-1 water tank and rinse out,
following instructions on page 9.
15.
If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the dial
may need to be cleaned. To clean, first remove
nozzle and locate screw that holds the diverter
assembly in place. With a Phillips screwdriver,
remove the screw and set aside.
16.
Remove diverter assembly; hold under
running water making sure water flows through
and around the dial. Turn the dial about 10 times
clockwise and 10 more times counter
clockwise. This should free up any debris.
17.
Wipe diverter assembly with a soft cloth and
replace back on machine. Replace nozzle.
18.
Return ReadyTools dial to FLOOR
CLEANING setting.
www.BISSELL.com
10
Summary of Contents for CLEANVIE PROHEAT 46L5-F
Page 1: ...CLEANVIEW PROHEAT USER GUIDE MODEL 46L5 F...
Page 18: ...18 Notes...
Page 19: ...19 Notes...
