10
global.BISSELL.com
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
1.
Remove three screws from
endcap. Pull endcap off to
release brush roll. The brush
comes out easily by tilting the
loose end out of the carriage.
2.
To replace the brush roll,
put the large open end of the
brush onto the carriage and
tilt the opposite end back
into place. Use a cloth to
wipe debris from brush roll
chamber.
3.
With the brush sitting
relatively straight up and down
by itself, place endcap back on
top and replace three screws.
Hold the brush center to the
cover while placing it back on.
4.
Spin the brush by hand to
make sure it turns freely with
some minor resistance from
the motor. Push brush carriage
back into place.
Storing Your Machine
Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed
and dried before the next use. Store cleaner in a protected, dry area.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
Removing & Replacing the Brush Roll
