background image

TurboBrush

®

 

(Select Models):

Use rotating brush action for small areas such as stairs 
and upholstery. 

Note: Press gently when using TurboBrush to gain 
maximum cleaning. Too much pressure could cause 
the brush to stop rotating.

Deluxe Bare Floor Tool (Select Models):

Use for bare floors. Swivel head turns to get into tight 
spaces and fits under cabinets.

Note: The Deluxe Bare Floor Tool does not store 
on board.

All items may not be included with your model. More 
tools are available; to order please refer to page 15 .

The Detachable Canister feature makes it possible 
to easily take the powerful cleaning action of your 
BISSELL Lift-Off Revolution to stairways, auto interiors, 
and other hard-to-reach areas of your home.

Before detaching the Canister, your vacuum must be 
in its fully Upright Position. You do not need to turn 
off the power first. 

Press the Release Button at the top of the Canister 
Handle and lift the Canister to remove.

Detach the Vacuum Hose from the Hose Grip Base at 
the back of the Canister.

Attach the desired tool(s) to the Hose Grip at the end of 
the Vacuum Hose.  

When you’re done, remove the tool(s) and reconnect the 
Hose to the Hose Grip Base.  

Return the Canister to the Powerfoot by aligning the 
“feet” on the front with the bumps on the foot of the 
Upright Vacuum. Push the Canister toward the vacuum 
frame until it “clicks” into place.

Select Models Only

The Clean Filter Indicator tells you when airflow in 
the vacuum is reduced due to dirty filters or a clog 
in the hose. The Clean Filter Indicator will remain 
green until the airflow is reduced. At that time, it 
begins to change to red. When it is fully red, the 
airflow is significantly reduced or blocked. Follow 
the steps on pages 10 -11 to clean your filters. All 
filters in the vacuum should be cleaned or replaced 
when the Clean Filter Indicator turns red.

If the indicator remains red after all filters have 
been cleaned, follow the steps on page 13 to 
check for and clear clogs. 

1.

Cleaning With The Detachable Canister

8

2.

3.

4.

Release 
Button

NOTICE: 

While vacuuming, certain 
carpets and low humidity 
conditions may generate small 
static discharges. The discharges 
are entirely harmless and are not 
associated in any way with the 
main power supply.

5.

Special Tools Continued

Clean Filter Indicator

ug603-5567_3760-6850_905.indd   8

ug603-5567_3760-6850_905.indd   8

10/3/05   3:52:47 PM

10/3/05   3:52:47 PM

Summary of Contents for 3760-3

















Reviews: