Bisonte PC100-H, User Manual

Page: 68 / 82

1. INTRODUCTION
Thank you for your selection of our equipment. We have taken care in the design, manufacture and testing of this product. Should
service or spare parts be required, prompt and efficient service is available from our branches.
General Safety instructions for the Operation of Power Equipment. Our factory’s goal is to produce power equipment that helps the
operator work safely and efficiently. The most important safety device for this or any tool is the operator. Care and good judgment
are the best protection against injury. All possible hazards cannot be covered here, but we have tried to highlight some of the
important items, individuals should look for and obey Caution, Warning and Danger signs placed on equipment, and displayed in
the workplace. Operators should read and follow safety instructions packed with each product.
Learn how each machine works. Even if you have previously used similar machines, carefully check out each machine before you use
it .Get the “feel” of it and know its capabilities, limitations, potential hazards, how it operates, and how it stops. We has no duty if
person don’t operate as instruction said.
2. APPLICATIONS
Plate compactor is the machine that compacts the ground and it intends to make the surface smooth, by transmitting vibration
through vibrating plate, which power generated from single motor in vibrator case This machine is suitable for making the ground
surface smooth, such as leveling the soil and beaching, finishing the asphalt paving. Applications as followings: Trench compaction
Earth works Road maintenance Landscaping Brick paving Driveway toppings
Warning for incorrect application and abuse
This machine is hard to move forward on a soil with much water (especially clay soil).It is not suitable for such application. This
machine is difficult to level a ground include big stones due to insufficient compacting force. Plate compactor is mainly applied for
compacting surface smooth and it is nor effective for jobs that requires heavy compaction. In case of compacting ground deeply
into lower layer, it is recommended to use. Tamping Rammer, Vibrato Compactor and Vibration Roller which compacting force is
rather effective.Please use this compactor for compacting surface on soil, sediment, sand , beaching and asphalt. It is not
recommended for use this machine for the other applications.
3. STRUCTURE
The upper part is made up of Power Source, Handle ,Belt Cover and Guard Hook which are fixed by Engine base. The Engine base is
fixed on Vibrating Plate by Shock Absorbing Rubber.The lower part is made up of Vibrating Plate and Vibrator unit that has an
Eccentric rotary shaft built in. The power source is transmitted from the centrifugal clutch on engine output shaft to the eccentric
rotary shaft via V-belt. Power Transfer Air-cooled single cylinder engine is amounted as power source and Centrifugal Clutch is fixed
on engine output shaft. Petrol Engine(2 cycle, 4 cycle) and Diesel Gasoline Engine can be mounted as option. Centrifugal Clutch
engages by running up the engine and engine is reduced o suitable number for compacting. The rotation of engine is transmitted
from V-pulley integrated with Clutch drum to Vibrator pulley through V-belt. Vibrator Pulley rotates Eccentric rotor shaft that is
contained in Vibrator case. The generated vibration created from eccentric rotor is transmitted to Compaction with the weight of the
machine makes the compaction of the ground possible.
4. FUNCTIONS AND CONTROLS
Motor: The motor is controlled by an ON/OFF switch or push button which is mounted on the motor below the fuel tank. The motor
speed is controlled by a remote throttle lever which is mounted on the machine handle. Honda and Kama motors are fitted with an
oil alert device which will stop the motor or prevent starting when the crankcase oil level falls below a safe level
Drive belt: Tension of the drive belt is adjustable. Loosen the four nuts on the bolts which secure the motor to the base plate, Adjust
the set screws which bear against the motor crankcase to achieve the required belt tension .Ensure that the four nuts and the set
screw lock nuts are tightened after adjustment.
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
68