Put the throttle lever at the idle speed , make the engine run 2~3
⑴
minutes
;
Put the stop switch to th
⑵
e stop position.
Note:In urgent case , put the throttle switch at the close
position , and then close the stop switch . Keep your hands
away from rotating plough, the gear wheels are been turning
after stopping the machine.
Ⅵ
、
MAINTENANCE
Ⅰ
、
Maintenance body
You must check each screw on the machine to make sure there is
⑴
no screw untighted when the machine works for one or two hours or
when stopping to add oil
;
Add the lube in the gear case when the machine works 20 hours
⑵
;
W
⑶
hen the gear wheels damaged , please repair or replace.
Ⅱ
、
Maintenance engine
Maintenance plug
⑴
The electrode gap should be moderate and keep
plug cleaning, in order to keep the engine working well.
You should regulate the gap to 0.5~0.7mm , check
frequently and adjust when the gap is too long or too
short.
Maintenance the air filter
⑵
Surface of cleaner should be cleaned often , if the cleaner elament
were jammed , cleaned the cleaner element and cleaner body by gas. put a
drop of motor oil on the cleaner element and then wrost it dry attach it to
the inside cover.
www.italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
56