9
4.1 Setting
Press and hold “SET” for 3 seconds, display “P1”
Power on
Press “OPEN” or “CLOSE” to switch Parameters
Each click “OPEN” increases value by 1; press and hold “OPEN” value increase till reduse the button.
Each click “CLOSE” reduces value by 1; press and hold “CLOSE” value reduced till reduse the button.
Press "SET" ,enter next parameter set interface
(Save parameter only finish setting the final interface).
Mark : 1. In any state from "P1" to "L2", press "STOP " to save parameters.
2. In“L2”state
，
press "SET" to save parameters.
Press "STOP" save and quit set interface
Px setting ,X=1-9
No
Parameter
Description
Protect time for motor running,unit:second,motor will stop when over time
Motor speed:Lever 1 to 5 ,Min=1, Max=5
Reduce speed distance : 0-15
Sensitivity of reverse when obstacle 0-50
Limit set : 0=Normal Open, 1=Normal Close
Auto close delay time: 0-99. 0=no Auto close
Sofe stop reduce speed 1-5, 1=Fastest, 5=Slowest
Sofe stop, 0=no Soft stop, 1=valid
Test mode for engineer only default=0
Brake rate for engineer only default=0
Display mode. 0=Running state, for engineer only, default=0
Motor speed when the first time after power on, lever1 to 5 ,Min=1, Max=5
Factory set
1
2
3
4
6
7
5
8
9
10
11
P1
P2
P3
P4
P5
P6
P7
L0
L1
P8
P9
20
1
1
1
0
0
0
80
4
3
6
12
L2
0
4. Parameters setting
