7.
Select
FILE.
Direct to Port
8.
Then select
OK.
The program installation is now
complete.
PowerRIP must be registered before you
can use it.
Go to the section
Registering your
Software.
9.
When you print from an application it will ask you for
a file name. You can use almost any name but you
must print to
C:\BIRMY
directory or the drive letter
where PowerRlP was installed.
Note: When printing under Windows 3.11, PowerRlP
does not return user operation until printing is fin-
ished.
Birmy Graphics Corporation
11
