Vendor: S000013
Page
8
of
11
Step 14:
Insert and secure the right drawer frame support (19) using hardware parts B and O. Secure the
supports in the centre using hardware parts A, K, J and O.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 15:
Insert hardware part A to the footend (2) using a small mallet (not provided), then insert hardware
part J using a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 16:
Undo the screws and washers in the headend (1) and footend (2), then attach them to the frame
using the screws, washers and hardware part J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
