Additional Features
26
Value
Sets the position of the limit line on the vertical scale (Y axis). Press the field to
enter a value.
Step
Sets the numerical value the limit line will move when the Move UP or Move
Down button are pressed. Press the field to enter a value.
Move Up
Press to move limit line up the vertical scale. Each press will move the limit line
the value in the Step field.
Move Down
Press to move limit line down the vertical scale. Each press will move the limit
line the value in the Step field.
FailFlag (On/Off)
Press to toggle fail flag on and off. The words
PASS
or
FAIL
will be displayed in
the sweep display area to indicate if the active signal is within or outside the
limits set by the limit line.
FailAlarm (On/Off)
Press to toggle fail alarm on and off. An audible alarm will sound if the active
signal is outside the limits set by the limit line.
Figure
15
Example Limit Line
