INSTALLATION
15
DSP-880
Series Customer Pole Display
4.1.2 RS-232 Interface
If you select the item COM port (RS232 only), the dialog of RS-232 setting will
show up to configure the RS-232 interface. Please make sure the parameters
that you type here are the same as the settings of your host PC. If the
parameters aren’t the same, the communication between host PC and your
machine will fail.
4.1.3 Selecting Device Driver
Please select your device from the pull-down list on following dialog. If the device
driver is installed, your device shall be shown on the list.
4.1.4 Select Model Name
Before continue, please select a proper model name that matches with your
device’s model. The model name can be selected on the upper-right corner of the
window. If the model name does not match with your device, the configuration
may not take effect.