NSTALLATION
DSP-880
Series Customer Pole Display
14
CHAPTER 4 CONFIGURE YOUR DEVICE
The system parameters of
DSP-880
Series can be set by using VFD Utility
software tool. You can find the tool in the companion disk. In addition to
setting system parameters, you can configure welcome message and user font
with the software tool. The system parameters include the following items.
Language Character Set
Command Type
Baud rate
Parity Check
4.1 Before starting
Before starting the software, please make sure the
DSP-880
Series is connected
to your PC and it works. If you use USB interface or device driver, please
install device driver before starting the software. If the connection is OK,
execute the software.
4.1.1 Select a proper interface
After starting the software, the following dialog will pop up. Select a proper
interface.