7
Troubleshooting
1. Power light not lit.
Check the following:
- is the unit turned on?
- is the unit plugged in?
- is the electrical outlet working?
2. Lamp indicator light not lit.
Check the following:
-is the unit turned on and the fan working?
-is the lamp connector securely attached?
-is it time to replace the lamp?
(See “Maintenance” section)
3. Low air flow.
Check the following:
-is the fan input or output obstructed?
4. Power Light Flashes Red
Check the following:
-Electrical Fault, Service Required
-Unplug the unit from the electrical outlet for 10
seconds and then plug into outlet again.
-If Power LED continues to flash RED, replace lamp or
contact BioZone for service
Specifications
Purification Method:
Photoplasma / Photochemistry
Treatment Area:
(See “Range Specifications” section)
Ozone Output:
Accumulation will not exceed 0.04 ppm when
used according to recommendations. (See
“Range
Specifications”
section)
Ion Generation:
Photo ionization of negative ions
Control Panel Indication:
A) Power indicator light
B) Timer indicator light
C) Fan Speed indicator light
D) UV Lamp indicator light
Timer Control:
[Continuous] or [ 2], [4] or [8] hour
Fan Control:
Low Fan / Med Fan / High Fan
Lamp Life Monitor:
8,760 Hours
Remote Control:
Infra Red 3-Key Remote Control
Remote Control Distance:
19 ft / 6 m maximum
Materials:
ASA, Aluminum Composite
Power Cord:
AC / DC transformer, “B” type - center pin “+”
Electrical Input:
12V DC
Certifications:
Wall Adapter: UL, CE, CSA; Ballast: TÜV; Lamp: CE
Manufacturer’s Part Number:
PR05, PR10, PR20, PR30
T R O U B L E S H O OT I N G
