Bioxigen BIOXAIR BXMCB2, Installation, Use And Maintenance Instruction

Page: 37 / 44

37
3 mm Mesh “I” Condenser “D“
PVC Base
WARNING!!
Leave a minimum distance of 3 mm from the bottom of the condenser.
11. Clean the outside of the device.
12. Reset the condenser on the spring and screw it back in its housing using the red bushing.
13. Insert the device back in, checking that the cover on the box is perfectly closed.
14. Tighten the screws of the box by fixing the cover.
15. Plug in the power socket.
16. Turn the appliance on by pressing the green button and returning it to position I.
17. Check the operation of the equipment. You should now hear a slight noise.
Make sure the Bioxigen ® device is working. See if it responds to commands. If there is a malfunction, unplug it and
consult a technician.
6.4 Extraordinary maintenance
The only part that is subject to wear is the electrical condenser whose efficiency decreases over time.
When signs of wear appear the component must be replaced. These signs are the appearance of oxide on the internal
mesh of the condenser and clouding of the quartz glass.
The maximum life of the condenser under normal operating conditions is 16.000 hours.