manualshive.com logo in svg

Biotek Biolux HOS Series, Owner'S Manual, Page: 32 / 33

Share
Download
Biotek Biolux HOS Series Owner'S Manual Download Page 32

Service & Maintenance

Symptom

Possible Cause

Resolution

Display Code: S31

2 beeps when pressing any key.

2% life remaining notification for 

Reverse Osmosis module 

Replace the notified part. Contact your 

dealer to arrange service ASAP.

Replace the notified part. Contact 

your dealer to arrange service 

IMMEDIATELY.

2% life remaining notification for 

Deionization module

Replace the notified part. Contact your 

dealer to arrange service ASAP.

2% life remaining notification for 

Off-gas Destructor

Replace the notified part. Contact your

dealer to arrange service ASAP.

Replace the notified part. Contact your

dealer to arrange service ASAP.

Replace the notified part. Contact your

dealer to arrange service ASAP.

Replace the notified part. Contact your

dealer to arrange service ASAP.

2% life remaining notification for 

System Cooling Fan.

2% life remaining notification for 

Source Water Hose.

2% life remaining notification for 

iEOG Cell.

Service due and life ending 

notification for Reverse Osmosis 

module

Service due and life ending 

notification for Deionization 

module

Replace the notified part. Contact 

your dealer to arrange service 

IMMEDIATELY.

Service due and life ending 

notification for Off-gas Destructor

Replace the notified part. Contact 

your dealer to arrange service 

IMMEDIATELY.

Replace the notified part. Contact 

your dealer to arrange service 

IMMEDIATELY.

Service due and life ending 

notification for System Cooling Fan.

Service due and life ending 

notification for Source Water Hose.

Replace the notified part. Contact 

your dealer to arrange service 

IMMEDIATELY.

Contact your dealer to arrange 

service IMMEDIATELY.

Notification for iEOG Cell.

Display Code: S31

All functions suspended.

10 sec alarming, followed by 5 beeps

when pressing any key.

Display Code: S32

All functions suspended.

10 sec alarming, followed by 5 beeps

when pressing any key.

Display Code: S34

All functions suspended.

10 sec alarming, followed by 5 beeps

when pressing any key.

Display Code: S38

All functions suspended.

10 sec alarming, followed by 5 beeps

when pressing any key.

Display Code: S39

All functions suspended.

10 sec alarming, followed by 5 beeps

when pressing any key.

Display Code: S71

All functions suspended.

10 sec alarming, followed by 5 beeps

when pressing any key.

Display Code: S38

2 beeps when pressing any key.

Display Code: S39

2 beeps when pressing any key.

Display Code: S71

2 beeps when pressing any key.

Display Code: S32

2 beeps when pressing any key.

Display Code: S34

2 beeps when pressing any key.

31

Summary of Contents for Biolux HOS Series


































Reviews:

No comments