10
TurboVap
®
96 Dual User Manual | © Biotage 2021
Define System Settings
Network and Firmware
Press the
Network and Firmware
button, see Figure 10, to enter
the Network and Firmware view (Figure 13).
Note:
The network connection is for Biotage personnel only.
1
Installed Firmware
See current firmware versions
2
Network Settings
See current network settings
Figure 13.
The Network and Firmware view.
System Information
Press the
System Information
button, see Figure 10, to enter the
System Information view (Figure 14).
The System Information view provides access to system
information such as instrument serial number, copyright
information, buttons for factory reset, and buttons for accessing
wizards for verifying and calibrating the touch screen.
»
Serial number:
Instrument serial number.
»
Uptime:
The total time of operation for the instrument.
»
Gas consumption:
The cumulative gas consumption for
the two cabinets. Press
Reset
to reset the counter.
»
Energy consumption:
The cumulative energy consumption
for the two cabinets. Press
Reset
to reset the counter.
»
Evaporation time:
The cumulative evaporation time for
the two cabinets. Press
Reset
to reset the counter.
»
Gas pressure:
Incoming gas pressure.
»
AC power:
Supply voltage and frequency.
»
Reset Methods:
Press the
Reset Methods
button
to reset all methods to their factory values.
»
Reset Settings:
Press the
Reset Settings
button to reset
all settings in Common settings, Evaporation Settings
and Network and Firmware to their default values.
»
Calibrate Touch:
Press the
Calibrate Touch
button to calibrate the touch panel. Follow
the instructions on the screen.
»
Copyright:
Display legal information
and software release year.
1
Serial number
Instrument serial number
2
Uptime
Total time of operation
3
Total gas consumption, left cabinet
4
Total gas consumption, right cabinet
5
Total energy consumption, left cabinet
6
Total energy consumption, right cabinet
7
Total evaporation time, left cabinet
8
Total evaporation time, right cabinet
9
Gas pressure
Incoming gas pressure
10
AC power
The measured voltage and
frequency of the mains supply.
11
Reset Methods
Reset methods to their default
values
12
Reset Settings
Reset settings to their default values
13
Calibrate touch
Calibrate the touch screen
14
Copyright
Display legal information
Figure 14.
The System Information view.
Warnings in the Software
The software has 3 types of messages
Error
An error message is displayed. The system
shuts down, ongoing evaporation runs are
terminated, the gas flow is terminated, the
plate heaters are turned off and the LED lights
change color to red.
Follow the instructions displayed in the
message.
Warning A warning message is displayed. The system
continues to run. The LED lights do not change
color.
Follow the instructions displayed in the
message.
Info
An information message is displayed.
Follow the instructions displayed in the
message.