background image

© Biotage 2017

Title Truncated if Neccessary... | Page 10

EUROPE

Main Office: +46 18 565900
Toll Free: +800 18 565710
Fax: +46 18 591922
Order Tel: +46 18 565710
Order Fax: +46 18 565705
[email protected]
Support Tel: +46 18 56 59 11
Support Fax: + 46 18 56 57 11
[email protected]

NORTH & LATIN AMERICA

Main Office: +1 704 654 4900
Toll Free: +1 800 446 4752
Fax: +1 704 654 4917
Order Tel: +1 704 654 4900
Order Fax: +1 434 296 8217
[email protected]
Support Tel: +1 800 446 4752
Outside US: +1 704 654 4900
[email protected]

JAPAN

Tel: +81 3 5627 3123
Fax: +81 3 5627 3121
[email protected]
[email protected]

CHINA

Tel: +86 21 2898 6655
Fax: +86 21 2898 6153
[email protected]
[email protected]

KOREA

Tel: + 82 31 706 8500
Fax:+ 82 31 706 8510
[email protected]
[email protected]

Distributors in other regions  
are listed on www.biotage.com

Part Number: 415970-B

© 2017 Biotage. All rights reserved. No material may be reproduced or published without the written permission of Biotage.  

Information in this document is subject to change without notice and does not represent any commitment from Biotage. E&OE.  

A list of all trademarks owned by Biotage AB is available at www.biotage.com/legal. Other product and company names mentioned 

herein may be trademarks or registered trademarks and/or service marks of their respective owners, and are used only for 

explanation and to the owners’ benefit, without intent to infringe.

Your Complete 

Partner for Effective 

Chemistry

 

Biotage is a worldwide supplier of 
instruments and accessories designed 
to facilitate the work of laboratory and 
process chemists. With our deep knowledge 
of the industry, academic contacts and 
in-house R&D teams, we can deliver the best 
solutions to your challenges. We take great 
pride in our flexibility and ability to meet our 
customer’s individual needs. With strong 
foundations in both analytical, organic and 
process chemistry, we can offer the widest 
range of solutions available on the market. 

Summary of Contents for SPE Dry 96













Reviews: