Biosynex Exacto 0075N, Manual

Page: 37 / 104

37
CARE AND MAINTENANCE
1. Clean the device and arm cuff carefully only with a slightly moistened cloth.
2. Do not immerse the device in water. It may cause damage if water enters.
3. Do not use any gas, strong detergent, or solvents to clean the device, including the cuff.
4. Disconnect the cuff and tubing from the monitor prior to storing.
5. Do not use any liquids on the monitor or cuff.
6. Use a soft, dry cloth to clean your monitor.
7. Do not store in direct sunlight, dust or excessive humidity.
8. Avoid extreme temperatures.
9. Do not disassemble the monitor or cuff.
10.Remove batteries if the monitor will not be used for an extensive period of time.
STANDARDS APPLIED
This product is in accordance with the measures in directive CE MDD (93/42/CEE).
The following standards apply to the design and/or the manufacturing of the products:
EN 1060-3
Non-invasive sphygmomanometers – Part 3: Additional requirements for the elec-
tromechanical blood pressure measuring system
EN 1060-4
Non-invasive sphygmomanometers – Part 4: Test procedures that aim to determine the
overall system accuracy of automated non-invasive sphygmomanometers
ISO 14971
Medical Devices – Application of risk management to medical devices. Classification
according to IEC/EN 60601-1 paragraph 5:
• Internally-powered equipment
• IPXO
• Equipment not suitable for use in the presence of an anaesthetic mixture flammable
with air or oxygen or nitrous oxide.
• Continuous operation