Biosynex Exacto 0075N, Manual

Page: 29 / 104

29
6. Insert your left arm into the created cuff cylinder. Position the ( ) mark over the main
artery on the inside of your arm.
7. The bottom edge of the cuff should be positioned approximately one inch above the
elbow joint.
PLACEMENT OF THE PRESSURE SLEEVE
It is important to avoid smoking, eating, taking medication, alcohol consumption or physical
activity 30 minutes prior to taking a reading. If for any reason you are unable to or should
not use your left arm, please modify the instructions for cuff application to your right arm.
Your physician can help you identify which arm is best for you to take measurements from.
1. Remove any constrictive clothing or jewelry that may interfere
with cuff placement.
2. Be seated at a table or desk with your feet flat on the floor.
3. The cuff should not be plugged into the monitor until after
the cuff is applied to your arm.
4. Position the cuff on a solid surface with the tubing facing up
and away from you. The metal ring/bar on the cuff should be to
the left of the tubing.
5. Open the cuff by pulling or rolling the bottom of the cuff to
the right. This should open the cuff without fully unrolling it,
creating a cylinder. Do not fully unwrap or unroll the cuff.
Main Artery