Biostar PT880 Pro-A7 DDR2 Manual Download Page 45

Page: 45 / 74

PT880 Pro-A7 DDR2

Hard Disk Boot Priority

These BIOS attempt to load the operating system from the device in the sequence

selected in these items.

The Choices:

Pri. Master, Pri.Slave, Sec.Master, Sec. Slave, USBHDD0,

USBHDD1, USBHDD2 and

Bootable Add-in Cards.

First/ Second/ Third/ Boot Other Device

These BIOS attempt to load the operating system from the devices in the
sequence selected in these items.

The Choices:

Floppy, LS120, Hard Disk, CDROM, ZZP100, USB-FDD,

USB-ZIP, USB-CDROM, LAN, Disabled.

Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical drive
assignments.

The Choices: Disabled

(default),

Enabled.

Boot Up Floppy Seek

Enabling this option will test the floppy drives to determine if they have 40 or 80
tracks. Disabling this option reduces the time it takes to boot-up.

The Choices: Enabled

(default), Disabled.

Summary of Contents for PT880 Pro-A7 DDR2











































































Search results

Summary of Contents for PT880 Pro-A7 DDR2

Reviews:

Related manuals for PT880 Pro-A7 DDR2

Brands by name

Popular brands

Biostar PT880 Pro-A7 DDR2, Manual

Search results

Summary of Contents for PT880 Pro-A7 DDR2

Reviews:

Related manuals for PT880 Pro-A7 DDR2

Brands by name

Popular brands