Biostar PT880 Pro-A7 DDR2 Manual Download Page 59

Page: 59 / 74

PT880 Pro-A7 DDR2

VIA OnChip PCI Device

If you highlight the literal “Press Enter” next to the “

OnChip PCI Device

” label and then

press the enter key, it will take you a submenu with the following options:

VIA-3058 AC97 Audio

This option allows you to control the onboard AC97 audio.

The Choices:

Auto

(default), Disabled.

VIA-3043 OnChip LAN

This option allows you to control the onboard LAN.

The Choices: Enabled

(default), Disabled.

Onboard LAN Boot ROM

This item allows you to enable or disable Onboard LAN Boot ROM.

The Choices: Disabled

(default), Enabled.

Onchip USB Controller

Select “Enabled” if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals.
The Choices:

All Enabled

(default), All Disabled.

On-chip EHCI Controller

This item allows you to enable or disable the on-chip EHCI controller.

The Choices:

Enabled

(default), Disabled.

Summary of Contents for PT880 Pro-A7 DDR2











































































Search results

Summary of Contents for PT880 Pro-A7 DDR2

Reviews:

Related manuals for PT880 Pro-A7 DDR2

Brands by name

Popular brands

Biostar PT880 Pro-A7 DDR2, Manual

Search results

Summary of Contents for PT880 Pro-A7 DDR2

Reviews:

Related manuals for PT880 Pro-A7 DDR2

Brands by name

Popular brands