Chapter 2
BIOS Setup
2-11
Off
Numpad is arrow keys.
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
The Choices:
Normal
A pin in the keyboard controller
controls Gate A20.
Fast
(default)
Lets chipset control Gate A20.
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can be
configured.
The Choices:
Disabled
(default)
Enabled
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6
(default)
,
8,10,12,15,20,24,30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke.
The Choices: 250
(default)
,
500,750,1000.
Security Option
This option will enable only individuals with passwords to bring the system online
and/or to use the CMOS Setup Utility.
The Choices:
System
A password is required for the system to
boot and is also required to access the Setup
Utility.
Setup
(default)
A password is required to access the Setup
Utility only.
This will only apply if passwords are set from the Setup main menu.
APIC Mode
By selecting Enabled enables ACPI device mode reporting from the BIOS to the
Summary of Contents for M7VIG Pro-D
Page 79: ...04 19 2002 ...
