Biostar M6VLA Page 9 User Manual Download

Page: 9 / 76

Chapter 1

Motherboard Description

1-5

(3) Extended Capabilities Port (ECP).

−

Supports one serial port, 16550 UART with 16 byte FIFO.

−

UART data rates up to 1.5 Mbaud.

−

Supports one Infrared transmission (IR) port.

−

Supports PS/2 Mouse.

−

Supports 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB floppy disk
drives.

Direct Sound Ready AC97 Digital Audio Controller

−

Dual full-duplex Direct Sound channels between system memory and
AC97 link.

−

PCI master interface with scatter / gather and bursting capability.

−

32 byte FIFO of each direct sound channel.

−

Host based sample rate converter and mixer.

−

Standard v1.0 or v2.0 AC97 Codec interface for single or cascaded
AC97 Codec's from multiple vendors.

−

Loopback capability for re-directing mixed audio streams into USB
and 1394 speakers.

−

Hardware SoundBlaster Pro for Windows DOS box and real-mode Dos
legacy compatibility.

−

Plug and play with 4 IRQ, 4 DMA, and 4 I/O space options for
SoundBlaster Pro and MIDI hardware.

−

Hardware assisted FM synthesis for legacy compatibility.

−

Direct two game ports and one MIDI port interface.

−

Complete software driver support for Windows 95, Windows 98,
Windows NT, Windows 2000 and Windows ME.

Dimensions (Baby AT form-factor)

−

21.82cm x 22cm (WxL)

Power Management

−

Supports both ACPI (Advanced and Configuration and Power
Interface) and legacy (APM) power management.

−

ACPI v1.0 Compliant.

−

APM v1.2 Compliant.

−

CPU clock throttling and clock stop control for complete ACPI C0 to
C3 state support.

Summary of Contents for M6VLA













































































Search results

Summary of Contents for M6VLA

Reviews:

Related manuals for M6VLA

Brands by name

Popular brands

Biostar M6VLA, User Manual

Search results

Summary of Contents for M6VLA

Reviews:

Related manuals for M6VLA

Brands by name

Popular brands