iDEQ-T1 Setup Manual
21
EHCI Hand-off
This is workaround for OSes without EHCI hand-off support. The EHCI
ownership change should be claimed by EHCI driver.
Options:
Disabled (Default) / Enabled
USB Mass Storage Driver Support
The item allows you to enable or disable USB Mass Storage Driver Support.
Options:
Enabled (Default) / Disabled
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Options:
20 sec (Default) / 1 sec / 5 sec / 10 sec
Device reset time-out
The item sets USB mass storage device Start Unit command time-out.
Options:
20 sec (Default) / 10 sec / 30 sec / 40 sec
Device power-up delay
“Auto” uses default value: for a Root port it is 100ms, for a Hub port the delay is
taken from Hub descriptor.
Options:
Auto (Default) / Manual
Note: The following items appear only when you set the Device power-up delay
function to [Manual]
Device power-up delay in seconds
Delay range is 1 ~ 40 seconds, in one second increments.
Options:
5 (Default)
