Biostar GAMING Z170X, Manual

Page: 15 / 87

Chapter 2: Hardware installation | 15
GAMING Z170X
PANEL1: Front Panel Header
This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection.
Pin Assignment Function Pin Assignment Function
1 +5V
Speaker
Connector
9 N/A
N/A
2 N/A 10 N/A
3 N/A 11 N/A N/A
4 Speaker 12 Power LED (+)
Power LED 5 HDD LED (+) Hard drive
LED
13 Power LED (+)
6 HDD LED (-) 14 Power LED (-)
7 Ground
Reset
button
15 Power button Power-on
button 8 Reset control 16 Ground
GAMING_PANEL: Gaming Control Panel Header
This 16-pin header allows user to connect gaming control panel.
Pin Assignment Pin Assignment
1 N/A 2 TEMP_HIGH_P
3 CIRRX_8051 4 TEMP_MIDDLE_P
5 SMB_CLK_RESUME 6 TEMP_LOW_P
7 SMB_DATA_RESUM 8 CPU_CHECK_P
9 AUDIO_GAIN1 10 DDR_CHECK_P
11 GND 12 VGA_CHECK_P
13 VCC3_3 14 VCC5
15 VCC12- 16 VCC12
SATA_Express_1/2: SATA Express Connector
Each SATA Express connector can support one SATA Express device or two SATA devices.
Pin Assignment Pin Assignment
S1/S8 Ground P1 Reserved
S2/S9 TX+ P2 PERST#
S3/S10 TX- P3 CLKREQ#/DEVSLP
S4/S11 Ground P4 IFDet
S5/S12 RX-
S6/S13 RX+
S7/S14 Ground
Note
»
When using SSD module on PCIE-M2_1 slot, the SATA_EXPRESS_1 lower layer connector (SATA3_1L/
SATA3_2L) will be disabled.
»
When using SSD module on PCIE-M2_2 slot, the SATA_EXPRESS_2 connector will be disabled.