4 |
Chapter 1: Introduction
1�3
Specifications
CPU
Supports Intel® 4th Gen LGA1150 CPU Socket Desktop processor(35W TDP only)
Formerly Haswell Processor list is as below (22 nm Process only)
-- Intel® Core™ i3-4340TE Processor (4M Cache, 2.60 GHz)
-- Intel® Core™ i3-4330TE Processor (4M Cache, 2.40 GHz)
-- Intel® Pentium® Processor G3320TE (3M Cache, 2.30 GHz)
-- Intel® Celeron® Processor G1820TE (2M Cache, 2.20 GHz)
Chipset
Intel® H81
Graphic
Integrated Intel® HD Graphics engine
Dual independent displays as below:
1. D-Sub 15 pin VGA output (Max resolution: 1920 x 1200)
By using the DP to VGA controller(Realtek RTL2168) and support D-Sub 15 pin VGA output shared the
same signal with 2x8 pin VGA BOX header
* By using the VBIOS and configured the DDI signal to DP signal
2. LVDS output (Max resolution: 1920 x 1200)
By using the eDP to LVDS RTD2136R transmitter and supports the dual channel 18-24Bits LCD panel
* Support the Clone-mode and Extended mode
** LCD Brightness, adjust by BIOS, from 30%~100%, default 100%.
Main Memory
Supports Single Channel DDR3/3L 1600/1333
1x DDR3/3L SO-DIMM Memory Slot, Max. Supports up to 16 GB Memory
SATA
Chipset built-in serial ATA controller support
-- 2x SATA III, data transfer rates up to 6.0Gb/s
LAN
1x Realtek 8111G Gigabit Ethernet
10 / 100 / 1000 Mb/s auto negotiation, Half / Full duplex capability
Sound Codec
Realtek Codec ALC662 (support Blue-ray Audio)
1. Reserved 1*4 pins connector for the Line-out port (pitch 2.54 mm)
2. Reserved 2x 1*2 pins wafer connector for Amplifier output (ALC105 class D 3Watt)-Maximum
requirement is 2W/80hm
1*3 pins BOX connector for the MIC_IN
Expansion Slot
1x Full-size mini-PCIe Slot (mSATA/mini-PCIe mode by BOM select)
1x Half-size mini-PCIe Slot (WiFi Module)
Back Panel I/O
1x 4-pin 12V DC-IN jack
1x RJ11 connector (Cash Drawer)
1x VGA Output, DB-15 connector
2x USB3.0 connectors
2x USB2.0 connectors
1x RJ-45 connector (Gigabit LAN)
1x RJ-45 connector (RJ50)
On Board Connectors
& Headers
2x SATA III connector support 6.0Gb/s
2x SATA HDD power connector
1x 2*13 pins, Parallel port box-header
2x 2*5 pins, USB 2.0 ports header
3x 2*5 pins, COM2~4 header
3x 1*3 pins, COM2~4 5V/12V jumper
1x 2*5 pins, Digital I/O header (4-in/4-out)
1x 2*5 pins, front panel header
1x 1*4 pins, CPU PWM-FAN header
2x 1*3 pins, System DC-FAN header
1x 1*6 pins, PS/2 KB/MS header
1x 1*3 pins, 12V/24V Jumper (RJ11)
1x 4 pins, 12V power connector
1x 2*20 pins, LCD LVDS connector support Dual Channel
1x 1*8 pins, LCD Backlight Inverter power connector
1x 1*3 pins, LCD Backlight power select jumper(3.3V/5V)
1x 1*3 pins, LCD Inverter power select jumper(5V/12V)
1x 1*3 pins, Clear CMOS Jumper
1x Buzzer
1x 1*3 pins, Mic-In header
1x 1*4 pins, line out box header
2x 1*2 pins, Amplifier output ALC105 class D 3Watt/
Channel Amp
Board Size
170mm (W) x 170 mm (L), uATX
Qualification
RoHS, EuP
Operation Temperature
0°C ~ 40°C
Storage Temperature
-40°C ~ 90°C
Relative Humidity
10% ~ 90% (non-condensing)
Certification
CE/FCC Pre-scan
Other Features
PXE LAN boot ROM /ACPI/Power loss recovery
Energy Star Compliant
Sleep mode 2W / Lower/off mode 1W or lower
RoHS Compliant
Yes
OS Support
POS Ready 7 64bits/Windows 7 Embedded/Windows 8.1/Windows 10
Biostar reserves the right to add or remove support for any OS with or without notice.
