background image

Chapter 3: BIOS Setup | 33

EIH81-IHP User’s Manual

Onbaord Giga LAN

This item enables/disables onboard NIC.

Options: Enabled (Default) / Disabled
Onboard Giga LAN Option ROM

This item enables/disables Onboard LAN Option ROM.

Options: Disabled (Default) / Enabled
Azalia Audio Codec

This item controls detection of the Azalia device. Disabled = Azalia will be unconditionally 

disabled. Enabled = Azalia will be unconditionally Enabled. 

Options: Enabled (Default) / Disabled
EuP Control

When EuP is enabled, the system will meet EuP requirement.

Options: Disabled (Default) / Enabled in S5 / Enabled in S4-S5
Serial IRQ Mode

This item configures serial IRQ Mode.

Options: Quite (Default) / Continuous
Detect Non-Compliance Device

Detect Non-Compliance PCI Express Device. If enable, it will take more time at POST time.

Options: Disabled (Default) / Enabled

System Agent (SA) Configuration

Primary Display

This item selects which of IGFX/PEG/PCI Graphics device should be Primary Display or select 

SG for Switchable Gfx.

Options: Auto (Default) / IGFX / PEG / PCIE
Primary PEG

This item selects AUTO/PEG11/PEG12 Graphics device should be Primary PEG

Options: Auto (Default) / PEG11/ PEG12
Primary PCIE

This item selects AUTO / PCIE1 / PCIE2 / PCIE3 / PCIE4 / PCIE5 / PCIE6 / PCIE7 Graphics device 

should be Primary PCIE

Options: Auto (Default) / PCIE1 / PCIE2 / PCIE3 / PCIE4 / PCIE5 / PCIE6 / PCIE7

Summary of Contents for EIH81-IHP












































Reviews: