Chapter 3: BIOS Setup | 35
EIH81-IHP User’s Manual
3.4 Boot Menu
This menu allows you to setup the system boot options.
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation key.
Options: 2 (Default)
Bootup NumLock State
This item selects the keyboard NumLock state.
Options: On (Default) / Off
Full Screen Logo Display
This item allows you to enable/disable Full Screen Logo Show function.
Options: Enabled (Default) / Disabled
Fast Boot
This item allows you to enable/disable Full Screen LOGO Show function.
Options: Disabled Link(Default) / Enabled
»
»
Note: The following items appear only when you set the Fast Boot function to [Enabled]
VGA Support
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.
EFI driver will still installed with EFI.
Options: EFI Driver (Default) / Auto
USB Support
If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, specific
USB port/device will NOT be available before OS boot. If Enabled, all USB devices will be
available in OS and Post.
Options: Partial Initial (Default) / Full Initial / Disable Link
PS2 Devices Support
If Disabled, PS2 devices will be skipped.
Options: Enabled (Default) / Disable Link
Network Stack Driver Support
If Disabled, Network Stack Drivers will be skipped.
Options: Disable Link (Default) / Enabled
