32 |
Chapter 2: Hardware installation
BIH11-IHP User’s Manual
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value.
Options: 42 (Default)
Fan Ctrl Sensitive
The muneral is bigger, the Fan speed is higher.
Options: 80 (Default)
Network Stack Configuration
Network Stack
This item enables or disables UEFI network stack
Options: Disabled (Default) / Enabled
»
»
Note: The following items appear only when you set the Network Stack to [Enabled]
IPv4 PXE Support
This item enables or disables IPv4 PXE Boot Support. If disabled, IPv4 PXE boot support will
not be available.
Options: Disabled (Default) / Enabled
IPv4 HTTP Support
This item enables or disables IPv4 HTTP Boot Support. If disabled IPv4 HTTP boot support will
not be available.
Options: Disabled (Default) / Enabled
IPv6 PXE Support
This item enables or disables IPv6 PXE Boot Support. If disabled IPv6 PXE boot support will
not be available.
Options: Disabled (Default) / Enabled
IPv6 HTTP Support
This item enables or disables IPv6 HTTP Boot Support. If disabled IPv6 HTTP boot support will
not be available.
Options: Disabled (Default) / Enabled
IP6 Configuration Policy
This item allows you to set IP6 Configuration Policy.
Options: Automatic (Default) / Manual
