6
3. Getting started
3.1.
Unpacking.
Remove packing materials carefully and retain them for future shipment or storage of
the unit. Examine the unit carefully for any damage incurred during transit. The
warranty does not cover in-transit damage. Warranty covers only the units
transported in the original package.
3.2.
Complete set. Package contents:
Standard set
-
MSH-300 magnetic stirrer with hot plate .......................................................... 1 pce
-
Magnetic stirring element* ................................................................................. 1 pce
-
SR-1 attachable stand ....................................................................................... 1 pce
-
Power cable ...................................................................................................... 1 pce
-
Spare fuse (inside fuse holder) ......................................................................... 1 pce
-
Operating manual, Certificate .......................................................................... 1 copy
3.3.
Setup:
-
Place the unit upon even horizontal non-flammable surface at least 30 cm away
from any flammable materials;
-
Plug the power cable into the socket on the rear, and position the unit so that the
power switch and the plug are easily accessible.
3.4.
SR-1 stand installation
Remove the screw on the fixing socket at the stirrer back (fig.1/1) and retain for future.
Screw the part of the stand with the counter-nut into the fixing socket and secure with
the counter-nut. Screw in the second part of the stand into the attached first part.
Fig. 1 Stand installation
Fig. 2. Control panel
*
Multipurpose cylinder-shaped magnetic stirring element (6x25 mm), encapsulated in PTFE.
