8
5. Specifications
The unit is designed for operation in cold rooms, incubators and closed la-
boratory rooms at ambient temperature from +4
°C to +40°C in a non-condensing
atmosphere
and maximum relative humidity 80% for temperatures up to 31°C
decreasing linearly to 50% relative humidity at 40°C.
5.1.
Number of detection channels ..................................................................... 4
5.2.
Detector ................................................................................. Photomultiplier
5.3.
First Channel FAM
excitation wavelength ...................................................................................... 460 nm
emission wavelength ....................................................................................... 515 nm
5.4.
Second Channel JOE, HEX, R6G
excitation wavelength ...................................................................................... 532 nm
emission wavelength ....................................................................................... 570 nm
5.5.
Third Channel ROX
excitation wavelength ...................................................................................... 570 nm
emission wavelength ....................................................................................... 610 nm
5.6.
Fourth Channel CY-5
excitation wavelength ...................................................................................... 630 nm
emission wavelength ....................................................................................... 670 nm
5.7.
Rotor capacity
R-036 ................................................................................................ 36 x 0.5 ml tubes
R-048 ............................................................................................... 48 x 0.2 ml tubes
5.8.
Measurement time
(rotor R-036, 1 channel ) ......................................................................... 55 s
5.9.
Excitation source ................ Light diode (Luxeon), through interference filter
5.10. Interference filter transmission spectrum half-width ............................... 7 nm
5.11. Number of measurements per sample in detection mode ..................... 2000
5.12. Interface cable ........................................................................................ USB
5.13. Input voltage ......................................................................... 230V; 50/60 Hz
5.14. Power consumption, no more than ........................................................ 30 W
5.15.
Dimensions 400х250х190 mm
5.16. Weight* ................................................................................................. 8.5 kg
Biosan is committed to a continuous program of improvement and reserves
the right to alter design and specifications of the equipment without additional
notice.
*
Accurate within ±10%.
