Putting on your heart rate belt:
Wear the Heart Rate Belt on your chest with the sensor over your heart for
detection of the heart rate.
1. You will notice that there are two long grooved oval patches on the inside
of the heart rate belt. These are the electrode sensors for detecting your
heart rate. Before you put on the heart rate belt, wet these patches lightly
with water or a conductive gel using your index finger so that the sensors
can better detect your heart rate.
2. Open up the belt by unbuckling one of the side
clasps that connects the fabric strap to the
plastic strap.
3. Wrap the heart rate chest belt across your chest
as shown. Adjust the tightness of the strap so
that the strap sits snugly and comfortably just
below your pectoral muscle. Close the clasp.
2
