6
7
2.6 Set-up
Customizing the Defender to your needs
You can customize your Defender in the Setup menu. Highlight
SETUP in the introduction screen to enter the Setup Menu. Or,
highlight SETUP after resetting and then exiting a measurement
mode screen. The Setup menu has eight submenus.
To select a submenu, use the directional arrow buttons to high-
light the submenu and press the Enter button.
In submenus, brackets (i.e., <...>) indicate different selection
options. You can switch back and forth by pressing the forward or
backward (
or
) arrow.
Highlight CONFIRM after making changes and press the Enter
button to save the changes made.
2.4 Display Screen
Understanding the screen components
The Defender provides a menu of operational settings and com-
mands. The four directional arrow buttons on the control panel
allow you to navigate through the menu and select the desired
settings for your Defender. Your location within the menu is
highlighted for easy identification.
2.5 Menu Navigation
Moving through operational menus
• Use the directional arrows
,
,
and
on the control
panel to find your way through the menu.
• When your desired command is highlighted, simply press the
ENTER button on the control panel.
If you see a menu selection within angle brackets (<….>), that
means you have multiple options for an item. Press the left or
right (
or
) arrow button to see the options.
If you wish to use the factory settings proceed to
section 2.7 Measurements.
Defender
Defender 520 M
Range: 50–5,000 mL/min
with DryCal Technology®
MEASURE | SETUP
LCD Screen
Control Panel
On/Off Button
2.0