2
Introduction
Thank you for purchasing the BIOS Living Body Analysis Scale. This precision
device was developed with state-of-the-art technology and has a capacity of
396 lbs / 180 kg. The scale measures body fat by using one of the most reliable
methods of analyzing body composition – Bioelectrical Impedance Analysis
(BIA). It measures body fat and hydration percentage by analyzing biological
impedance and other body parameters through mild electronic current through
the body. These electronic currents are safe, but this scale should not be used
by individuals with pacemakers or other medical implants.
Features
• Blue backlight LCD 3½” x 1½” (8.9cm x 3.8cm)
• Thick impact resistant glass with stainless steel accents
• Accurate to 396 lbs / 180 kg
• LB / KG / ST switchable
• 2 x CR2032 batteries (included)
Using Your Scale
Two lithium batteries (CR2032) are included with your bath scale.
1. Open the battery cover located on the back of the scale.
2. Remove the battery cover from the back of the scale, by lifting the black tab.
3. Remove the protective film from the battery and place batteries according to
the correct polarity and close the battery cover.
General Information
• The scale requires bare feet for proper conductivity while measuring body fat.
• Place the scale on a hard, flat surface (avoid carpet or other soft surfaces).
NOTE:
If the scale is placed on a soft surface, such as a carpet, or on an
uneven floor the result may be inaccurate.
•
DO NOT USE
the body fat monitor function if you are using the following
devices which will interfere with electromagnetic current such as:
- Cardiac pacemaker
- Implantable cardioverter defibrillators
