21
4.3 Setting Deflation Rate
In the Auscultation mode, select the deflation rate of 2.5 mmHg/sec, 4.5 mmHg/sec, 6.5 mmHg/sec
by pressing the “
S” SET
button.
AUSCULTATION
AUSCULTATION
AUSCULTATION
4.4 Loose Cuff Detection
If the cuff was applied too loosely, it may cause unreliable measurement results or measurements
can fail to start. The “Loose Cuff Detection” can help to determine if the cuff is wrapped snugly
enough. The specified icon appears once a “loosen cuff” has been detected during the beginning
of a measurement. Otherwise the specified icon appears if the cuff is wrapped correctly during
the rest of the measurement.
4.5 Movement Detection
The “Movement Detection” helps remind the user to remain still and indicates any adverse body
movement during measurement. The specified icon appears once a “body movement” has been
detected during and after such a measurement.
Note:
It’s highly recommended that you measure again if the
icon appears.
4.6 Memory Recall
This blood pressure monitor automatically stores 7 measurements in Standard Mode only.
• Start with the power off, but with batteries or adapter inserted into monitor.
• Press the
ON/OFF
button to turn the monitor ON. Select the mode you would like to review
the memory from by pressing the
“M” MODE
button.
• Once the mode is selected you will need to turn the monitor off by pressing and holding the
ON/OFF
button until the LCD screen goes blank.
NOTE:
You can skip this step if you did not need to change the mode when monitor was
originally turned on in step 2.
