12
2.10 Preliminary Remarks
This Blood Pressure Monitor complies with the European regulations and bears the CE mark “CE
0120”. The quality of the device has been verified and conforms to the provisions of the EC council
directive 93/42/ EEC (Medical Device Directive), Annex I essential requirements and applied
harmonized standards.
EN 1060-1: 1995/A2: 2009 Non-invasive sphygmomanometers - Part 1 - General requirements
EN 1060-3: 1997/A2: 2009 Non -invasive sphygmomanometers - Part 3 - Supplementary
requirements for electro-mechanical blood pressure measuring systems
EN 1060-4: 2004 Non-invasive sphygmomanometers - Part 4: Test Procedures to determine the
overall system accuracy of automated non-invasive sphygmomanometers. This blood pressure
monitor was designed for long service periods. In order to ensure continued accuracy, it’s
recommended that all digital blood pressure monitors require re-calibration.
3. Initial Setup
3.1 Using the Adapter
You may also operate this monitor using the included
adapter. Use only the included adapter to avoid
damaging the unit.
1. Ensure that the adapter and cable are not damaged.
2. Plug the adapter cable into the adapter port on the
blood pressure monitor.
3. Plug the adapter into an outlet. The battery will be
recharged as long as the device is attached to an AC
power source. After the battery is fully recharged,
the charging will stop. No battery power will be
used as long as the adapter is plugged in.
Warning:
•
Do not
use this unit in places where inflammable gas, such as highly inflammable anesthetic,
may be generated or in a high pressure oxygen room or an oxygen tent. It may cause ignition
and explosion.
•
Do not
touch the AC adapter with wet hands. You may suffer electric shock.
•
Do not
install or store this unit where it may be sprayed with water or medication. You may
suffer electric shock.
