BIOS AP DVT10U3, User Manual

Page: 49 / 62

DVT10U3
－
46
－
3.2 Windows 7
The section explains how to use with Windows 7 for reference.
Please refer to Windows 7 user guide for details.
1
.
Confirm the connection
①
Connect and power on DVPro T10 then starts with host computer.
②
Press the Start Button and right-
click on “Computer”. Click on “Manage”.
③ Go to “Device Manager”. Click on Disk Drives and confirm that the DVPro T10 has been registered.
※
If you did not see DVPro T10 here, please check below

Is the host HBA recognized by OS or not?
（
Please consult with your HBA vendor if not
）

Was DVPro T10 normally started and connected?