BIOS AP DVT10U3, User Manual

Page: 42 / 62

BIOS AP Inc.
－
39
－
３．
Choose Internet Protocol Version 4(TCP/Ipv4) then click Properties button.
４．
Set Internet Protocol Properties
First, check
“use the following IO address”.
Considering RAID IP ADDRESS is 192.168.50.210 set
as follows:
IP address: 192.168.50.XXX (put unused address in place of XXX.)
Subnet mask: 255.255.255.0
Then, click OK button.

Make sure the IP address used here is not used by another device, or it may not work properly.