2
WARNING!
ELECTRICAL EQUIPMENT CHARGED WITH ELECTRICITY!
Prior to carrying out of any actions associated with hooking up power supply wires,
please, make sure that AIR BIO control unit (hereinafter referred to as Controller) is not
connected to the electric power network! Assembling and connection to the electric power
network shall be done by the specialist with the corresponding authority for this type of
work. Before switching on the Controller it is required to verify grounding effectiveness of
electric motors, the boiler as well as inspect electric wires insulation.
Caution! You shall definitely earth AIR BIO Control unit. The Controller shall be
connected to the earth bar in accordance with «Operating and Maintenance Rules
for Electric Installations of Consumers».
1 INTRODUCTION
1.1 Product Purpose and Delivery Set
AIR BIO control unit is designed to ensure cost-effective and safe operation of a
solid fuel boiler for the central heating, hot water supply pump, a fan and fuel supply
system.
AIR BIO delivery set includes:
1. Network cable with plug tip 2 m long
- 1 ea.;
2. Wire for hooking-up the fan with connector 0,5m long - 1 ea.;
3. Wire for hooking-up the pump 2m long - 2 ea.;
4. Wire for hooking-up the unit of automatic fuel supply 2m long - 1 ea.;
5. Temperature sensor with connecting wire 2 m long - 3 ea.;
6. Safety appliances - 2 ea.;
7. Operation Manual (passport) - 1 ea.;
8. Thermal protection sensor with connecting wire 2 m long - 1 ea.;
9. Clamp for fastening sensors, metal - 3 ea.
Additional options:
10. External alarm system - 1 ea.
1.2 Installation Requirements
Installation and adjustment of the Controller shall be carried out in the presence of
the qualified specialist. All installation works associated with installation/removal of the
unit or electric wiring shall be carried out only after power cut. Hookup diagram for the
control unit is shown on Picture 1, Picture 2, Picture 3.
AIR BIO Diagram
1.
Network 220V
6.
Hot Water Supply Boiler Temperature Sensor
2
.
Central Heating Pump
7. Thermal Protection Sensor
3. Fuel Screw Feed
8. Central Heating Temperature Sensor
4.
Hot Water Supply Boiler pump feed
9. Screw Feeder Temperature Sensor
5. Air Pressurization (fan feed)
