45
44
Recalling Test Results
Recalling Test Results
The
Blood Glucose Meter
is able to automatically store a maximum of 500 test results with time
and date. If your meter has stored 500 results, the newest test result will replace the oldest one.
To recall your test memory, start the meter without a test strip inserted.
Rightest
GM232C
1. Press the Main button to switch from the Time Mode to Memory Mode. You will see the “mem”
icon in the upper left corner of the display. The latest test result will appear with the number “1”.
2. Use either the Left or Right button on the side to review all previous results with date and time.
Results display from the most recent (Sequence no. “1”) to the oldest (Sequence no. “500”) in the
lower right hand corner of the screen.
3. The Quality Control Test result can be recalled from the saved data. When " " appears under
the data, the test was performed using the
. The control solution
test result will not be used when recalling test average results.
Rightest
Control Solution GC550
1. Press the Main button to switch the screen to Average Mode.
2. On the average screen, use either the Left or Right button to view 1-day, 7-days, 14-days, 30-days, 60-days or
90-days averages.
3. The number shown in the lower right hand corner indicates how many test results have been calculated.
4. Excluding test results from the average calculation:
You may exclude the test result from average calculation right after each test.
You have to perform this exclusion immediately after the meter displays the reading of your test result.
Press the Right or Left button to choose " " then press the main button to confirm. The test result is now
excluded from averaging.
The
Blood Glucose meter
provides several average test results. View the 1-day, 7-days, 14-days,
30-days, 60-days and 90-days average test results for better blood glucose monitoring.
Rightest
GM232C
Summary of Contents for GM232C
Page 2: ......
