BIONIME GM232C, User Manual

Page: 12 / 46

19
18
Setting Up Your Meter - Setting the Date, Time and Volume Setting Up Your Meter - Setting the Date, Time and Volume
2)
3)
1)
NOTE
- Use the Left and Right buttons to select your setting data and press the main button to confirm each
selection. After confirming all of the settings, you will return to the Time Mode.
You can enter the Setting Mode two ways.
1. Replace the Battery
2. With Battery Inserted
After removing the battery, press the main button several times until there is no signal on screen, then follow the
battery installation steps to replace battery. The
Righte st
Blood Glucose Meter GM232C will perform a self-test.
Press the main button to exit the self-test and enter the Setting Mode.
Press the main button to turn on the
Rightest
Blood Glucose Meter GM232C. Hold down the main button for 7
seconds. During this time the screen will go blank until you hear a beep. After the beep, the meter will turn on into
the Setting Mode. The display screen will show setting data.
1. Year setting
, press the Left or Right button until you see the current year. Press
the Main button to confirm.
2. Month setting
With the month blinking, press the Left or Right button until you see the current month. Press
the Main button to confirm.
With the year format blinking
Once the year is confirmed, the Month Setting will appear.
Once the month is confirmed, the Day Setting will appear.
Once the day is confirmed, the Time Setting will appear.
3. Day setting
With the day blinking, press the Left or Right button until you see the current day. Press the
Main button to confirm.