Setting by Menu Function
41
BFM-900L
FETAL MONITOR
(Ver 1.1)
40
Setting by Menu Function
6.2 Alarm Setting
Possible to set the Alarm Sounding Area
Step 1)
Press the Setup key( ) to move to menu setting mode in the basic screen.
If you press the Exit key( ) , menu will return to the basic screen.
Step 2)
Press the Up/Down key( ) to move to the Alarm menu in the menu setting mode.
Step 3)
Press the Enter key( ) to move to the detailed setting mode.
Step 4)
Press the Up/Down key( ) to move to desired setting mode among Auto Print,
Offset, Zoom, Speed, Contrast and Fetal Movement. If press the Exit key( ), menu will
move to the previous mode(Step 2). If press the Enter key( ), menu will move to
the detailed setting mode of each mode.
Step 5)
Press the Enter key( ) in Step 4 and desired the level will be twinkled. Then press the
Up/Down key( ) for changing the level. Refer to the above setting range in the table.
This system is not changed during printing.
Symbol
Description
Setting Range
If HR value is measured not smaller than
the top limit, ALARM will be made.
If HR value is measured not bigger than
the bottom limit, ALARM will be made.
50 ~ 240 bpm
Initial setting : 160 bpm
50 ~ 240 bpm
Initial setting : 80 bpm
High
Low