ExiPrep
TM
16 Plus
Fully Automated Nucleic Acid Extraction System
-12-
V. DNA/ RNA Extraction (continued)
3. RUN
1. Press the ‘
START’
button to access the PREP SETUP screen.
2.
Refer to the code list within this Manual or purchased Kit
Manual to select the three-digit code applicable to your
desired nucleic acid and sample source type.
3. Verify the
‘Prep Type’
and
‘Sample SRC’
of the three-digit
code you have entered.
4. Press the
‘Enter’
button to access the ‘
elution volume
’
selection menu.
5. Select
the
‘
elution volume
’
from the LCD touchscreen.
6. After selecting the desired ‘elution volume
’
press
‘ok’
to
complete PREP SETUP.
7. Open the instrument door and pull out the Base Plate.
8. Place all racks and Buffer Cartridges in their respective
locations on the Base Plate according to the
CHECK LIST
on
the LCD touchscreen.
